makerliner.blogg.se - Softraid m1 mac

#Softraid m1 mac how to#
#Softraid m1 mac mac os#
#Softraid m1 mac drivers#
#Softraid m1 mac update#
#Softraid m1 mac full#

For Thunder3 Quad Mini users, please go to and update the firmware.

Make sure the firmware of your device is up to date.

Test the device on a different computer.

Check the system report to see if the device is still recognized.

This kernel panic happened only with RAID levels that used stripes (RAID 0, 4, 5, and 1+0), when reads or writes to those volumes accessed more than one disk, and only on M1 Macs.

RAID 4/1+0 (10) are currently Mac only at this time. SoftRAID Pro and Lite work on work on OWC and third party enclosures. SoftRAID XT is designed for OWC storage solutions only. Apple silicon (M1) Macs require macOS 11.3 or later. After several weeks of investigating a kernel panic bug we were seeing in the SofftRAID driver, we reached out to Apple’s kernel engineers for help. SoftRAID works with macOS 10.12 or later and Windows 10 or later.

Make sure the device is connected directly to the coputer and not behind another device. The latest beta release of SoftRAID 6 now supports the M1 Macs.

If available, temporarily replace the cable.

Plug the cable into a different port, both on the device and on the computer.

Make sure the cable is plugged in securily.

If you were using Software RAID and everything works after removing the RAID set, re-create the RAID set and test the disks again.

Depending on the results, either replace the faulty disk or return the device for repair. If yes, swap the disks and check if the problem follows a certain disk or stays with one particular drive slot.

#Softraid m1 mac mac os#

Use Mac OS Extended when formatting the disks. Remove the RAID set and erase the individual disks.If you are using Software RAID, backup all your data in a different location first.If you are using a file system other than Mac OS Extended (HFS+) like APFS or FAT32, backup your data, format the drive using Mac OS Extendend and test it again.If you have encrypted the drive, decrypt it and test it without encryption.If available, run First Aid to check your disk for problems.Go to Applications > Utilities and open the Disk Utility.Add the external drive to the privacy list.

On your Mac, go to Preferences and open Spotlight.If you are using a laptop, you might have to do this twice, once for Power Adapter and once for Battery, depending on when the problem occurs.SoftRAID works with OWC RAIDs, Drobo, ORICO and many other third party RAIDs. SoftRAID has figured this out with SoftRAID Pro and SoftRAID Lite (for Intel+M1 Macs).

#Softraid m1 mac drivers#

Disable the option to put hard disks to sleep when possible. So why hasn’t CalDigit been able to figure this in in the past 10 months They claim that it’s too difficult to write the drivers for the Caldigit T4 RAID on an M1 Mac.

#Softraid m1 mac how to#

Following are some tips on how to troubleshoot such an issue: There could be different reasons why an external drive suddenly disconects, so if possible, it's best to try and narrow down the problem by testing different configurations and settings. Why does my drive disconnect from my Mac? And as you might suspect, OWC has a Thunderbolt Hub shipping soon for $149.FAQ - Frequently Asked Questions - Knowledge Base

#Softraid m1 mac full#

So yes, the M1-based Macs may have only two Thunderbolt ports, but they’ll both provide full bandwidth and allow users to add more ports through a hub. Standing also notes that the M1-based Macs have Thunderbolt 4, which differs from Apple’s implementation of Thunderbolt 3 in only one fundamental way: Thunderbolt 4 adds support for Thunderbolt hubs that let you add more ports. If you plug two fast drives into ports that share a bus, performance suffers. By comparison, each pair of Thunderbolt ports on the Intel-based Macs share a bus, meaning that they also share bandwidth. A 4 drive RAID 5 in SoftRAID with 8TB drives would result in 24TB of usable space. Although the new Macs have only two Thunderbolt ports, compared to four on the Intel-based 13-inch MacBook Pro and Mac mini, Standing discovered that each port has its own Thunderbolt bus. Yes this is a compatible enclosure for a 2021 16 MacBook Pro m1. any idea how to restart in recovery mode on the new M1 Mac Mini Unsure why they had to change. Over at the OWC Rocket Yard blog, SoftRAID developer Tim Standing shares a welcome discovery about Apple’s new M1-based Macs. I need to boot into recovery mode in order to disable secure boot security so that I can get softraid working, but when I restart holding down command + R the Mac mini just does a normal restart. Thunderbolt Improvements in the M1-Based Macs #1621: Apple Q3 2022 financials, Slack's new free plan restrictions, which OS features do you use?.#1622: OS feature survey results, Continuity Camera webcam preview, OWC miniStack STX.#1623: How to turn off YouTube's PiP, use AirPlay to Mac, and securely erase Mac drives.#1624: Important OS security updates, rescuing QuickTake 150 photos, AirTag alerts while traveling.#1625: Apple's "Far Out" event, the future of FileMaker, free NMUG membership, Quick Note and tags in Notes, Plex suffers data breach.